Step six: Organize the finish before you get there



If you look at the skeletal frame edges, you'll notice that there is a small lip that has been added to the outer top edge. This is provided as a means of both attaching the vinyl and a point of transition for the seam to be formed between the vinyl and carpet covered surfaces.

This lip is also a point to which the preliminary layer of grill cloth or t-shirt material can be attached, before the subsequent layers of fiberglass are added. You'll also notice that all of the edges that are to be covered with fiberglass have been rounded, this is done with the coarse file, and should be done wherever you plan to have vinyl covering your console.




Need a new project ...

Good luck on your project.