Home of Sport Trucks on the Web
forum features shows clubs news parts shop
Forum Index

Previous ThreadView All ThreadsNext ThreadShow in Flat Mode*

SubjectRe: Chrome
Reply to this message
Posted byJeff
Posted on5/19/07 6:26 PM

You should use metal (steel) to get it as close as you can. Copper is used as a filler to smooth out the metal in the chroming process, but you don't want to get that too thick. I've heard silver is also used to fill in small pits during the copper process.

Entire Thread
Subject  Posted byPosted On
*Chrome  SPRKSHW5/18/07 10:14 PM
..Re: Chrome  Jeff5/19/07 6:26 PM
.*Re: Chrome  indigobluextreme5/19/07 07:40 AM
..*Re: Chrome  SPRKSHW5/19/07 2:11 PM
...*Re: Chrome  SPRKSHW5/19/07 2:14 PM
....*Re: Chrome  indigobluextreme5/19/07 3:52 PM

Forums powered by