Yep, some more. Nothing fancy, just wish I could get rid of it.

The front cups seem to be long enough, however I still will not get enough lift at 160psi to clear the 30" tall tires. The rear is fine with 31.25" tall tires. The 20x10 with 285/50/20 looks awesome out back, if I were to do it all over again, I would have gone 285/35/22 front and 295/45/22 rear all BFG KDWII- but ohh well.

Ohh and it's dirty- and yes that's a trash bag over the carb.






The front lays crossmember- hard. The rear after doing some calculations (not actual measuring) is 2.125" off the ground. The notch was originally setup for a 27" tall tire (255/50/17 first then 285/30/20 and no it was not laying frame when featured in StreetTrucks on 285/30/22), and the 285/50/20 on there now is 31.25.