Sportruck.com Home of Sport Trucks on the Web
forum features shows clubs news shop
Forum Index
FAQ
Login
Search

Previous ThreadView All ThreadsNext ThreadShow in Flat Mode*

SubjectRe: What modifications would have to be made to run 22's on a 89 chevy stepside?
Reply to this message
Posted byJeff
Posted on7/27/09 8:16 PM



It involves more work up front to run 22s vs 20s. You will need to remove inner fenders and trim inside the fenders, notch frame for tie rods and lower control arms. If you keep the stock arms it requires more trimming on frame vs tubular arms. Depending on your tire size you will most likely need to cut a small section of firewall and remove hood springs so you can close the hood. In back you need about an 8-inch step notch measured from bottom of frame rail. Notch gas tank cross member and you probably also want to raise the tank.



-
Entire Thread
Subject  Posted byPosted On
*What modifications would have to be made to run 22's on a 89 chevy stepside?  bagged_stepside7/13/09 01:16 AM
..Re: What modifications would have to be made to run 22's on a 89 chevy stepside?  Jeff7/27/09 8:16 PM

Sportruck.com

Forums powered by Sportruck.com